porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing ATF Filter (As of MY 2002)|Page 2416 > < Removing and Installing ATF Filter (As of MY 2002)|Page 2414
Page 2
background image

3. Disengage cable on the retaining clips of the ATF pan.
4. Place oil collection pan under the transmission.
5. Unscrew drain screw -A- and drain ATF.

NOTE:  Without ATF, the engine must not be started and the vehicle must not be towed.

6. Remove ATF pan (loosen screws crosswise).
7. Remove ATF filter.

Installing ATF filter

1. Thinly coat gasket on the suction collar of the new ATF filter with Vaseline and install filter.
2. Clean ATF pan.

Removing and Installing ATF Filter (As of MY 2002)|Page 2416 > < Removing and Installing ATF Filter (As of MY 2002)|Page 2414