911 Targa (996) F6-3.6L (2004)
Fluid Transfer Tube: Service and Repair
Removing and installing inner oil tube
Tool
Notes on removal and installation
Removal
Note!
^
Defective toroidal sealing rings at inner oil tube let ATF enter the differential, which becomes overfilled, and oil emerges from the vent of the
differential. * In general, a removed oil tube should be replaced.
^
The oil tube must be inserted only with special tool 3381. Otherwise there is a danger of leakage due to bending of the oil tube.
1. Remove hydraulic control unit.
2. Lever out oil tube with a screwdriver.
Installation
Note!
^
Always replace oil tube and toroidal sealing rings.
1. Provide oil tube with new toroidal sealing rings and give rings a thin coating of Vaseline.