911 Targa (996) F6-3.6L (2004)
Pressure Regulating Solenoid: Service and Repair
Removing and installing pressure regulator
A Pressure regulator 1
B Solenoid valve 3
C Solenoid valve 2
D Pressure regulator 3
E Pressure regulator 4
F Pressure regulator 2
G Solenoid valve 1
Removal
Note!
^
The solenoid valves or pressure regulators are located on the hydraulic control unit.
Note!
^
Without ATF do not start the engine and do not tow the vehicle.
1. Place oil collection pan under the transmission.
2. Unscrew ATF drain screw (1) and drain ATF.
3. Remove ATF pan (loosen screws crosswise).
4. Pull off plug connection on solenoid valve or pressure regulator.