911 Targa (996) F6-3.6L (2004)
Valve Body: Removal and Replacement
Removing and Installing Hydraulic Control Unit
Removing and installing hydraulic control unit
Removing and installing hydraulic control unit
Note!
^
Do not let engine run with the ATF pan removed or without ATF filling.
Removal
1. Unscrew ATF drain screw (1) and drain ATF fluid.
2. Remove ATF pan. (Loosen screws in diagonally opposite sequence).
3. Remove ATF filter.
4. Disconnect plug connections for transmission speed sensors and solenoid valves.