911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-601002.png)
Removal
1. Remove transmission (refer to Service No. 34 35 19) .
2. Shift gear lever to neutral, unscrew fastening screw "A" and remove snap ring "B".
A - Fastening screw
B - Snap ring
C - Closure cap
3. Drill a hole of 3.5 mm in the centre of the closure cap (coat drill with thick grease in order to prevent drilling chips from falling into the transmission),
screw in sheetmetal screw (4.8 x 25) with a large washer and lever out the closure cap using two screwdrivers.
