911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-1203005.png)
9.1. Remove windscreen with the cutting wire separator.
Preparing the window section for installation
INFORMATION:
-
The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning
solution.
-
A ventilation period of at least 10 minutes must be observed between the cleaning of the glass section and the application of the primer. No
cleaning solution residues may remain on the body.
1. Removing adhesive from the body
1.1. When removing remaining adhesive -7- with the cutting tool -C- and the flashing knife -D- on the body, ensure that a surface coating of
adhesive remains -8-.
2. Cleaning and priming paint damage or newly built-up paint areas in the window aperture of the body
2.1. Clean new paint areas or damage to the top coat paint in the non-visible area of the glass section in the body with cleaning solution -H1- and
patch with primer -H2-.
Preparing the windscreen for installation
INFORMATION:
