911 Targa 4 (997) F6-36L (2010) Center Underbody Cover Removal and Installation
1. Unscrew fastening screws -2- and fastening nuts -3- .
2. Remove cover for rear underbody -1- .
Installing cover for rear underbody
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for rear underbody -1- .
2. Tighten fastening screws -2- and fastening nuts -3- . - Tightening torque: 2 Nm (1.5 ftlb.). - Tightening torque: 2.5 Nm (2 ftlb.)
Subsequent work
Reworking
Lower the vehicle.