911 Targa 4S (997) F6-3.8L (2007)
Front Door Interior Handle: Service and Repair
Rremoving and Installing Handle
Removing And Installing Handle
Technical values
Preliminary work
1. Remove door trim panel. Refer to Removing and installing door trim panel.
Removing handle
Removing inner door handle
1. Undo fastening screws -1-.
2. Take off inner door handle -2- (-arrow-).
Disassembling inner door handle
1. Insert a plastic wedge between the upper part of the handle -1- and the lower part of the handle -2- and press off upper part of handle.