911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-772001.png)
Trunk / Liftgate Latch: Service and Repair
Removing and Installing Closing Aid
Removing And Installing Closing Aid
Technical values
Preliminary work
Preliminary work for closing aid
Hold rear-wall lining underneath at the sides and carefully pull it out of the clips in -direction of arrow-.
Removing closing aid
1. Unscrew the fastening screws -1- and fold over the closing aid, which is engaged in the support strut -Inset- on the body.