911 Targa 4S (997) F6-3.8L (2007)
-
Tightening torque: 100 Nm (74 ftlb.)
8.2.
Install diagonal braces -1-.
Fit diagonal braces -1- and screw in and tighten screws -2-.
-
Tightening torque: 100 Nm (74 ftlb.)
9. Fit brake caliper.
Removing and installing brake caliper
Fit brake caliper -1- and screw in and tighten M12 screws -2- for brake caliper.
Always replace M12 screws -2- for brake caliper before fitting.
-
Tightening torque: 85 Nm (63 ftlb.)
10. Fit connecting link on anti-roll bar.
Fit connecting link -1- on anti-roll bar and screw on and tighten nut -2-.
-
Three-stage tightening procedure (1st stage: tighten to 50 Nm (37 ftlb.). 2nd stage: loosen by 90 degrees. 3rd stage: tighten to 65 Nm (48
ftlb.).: 65 Nm (48 ftlb.)
Removing and installing connecting link and wheel carrier
11. Fit brake line holder and electric cable plug.