911 Targa 4S (997) F6-3.8L (2007)
2. Insert the mat -3-
Subsequent work
1. Install centre console cover. Refer to Removing and installing centre console cover.
Removing and Installing Front Side Section Trim
Removing And Installing Front Side Section Trim
Technical values
Removing front side section trim
Removing front side section trim panel (driver's side)
1. Remove fuse carrier cover -1- -Arrow A-.
2. Unscrew fastening screws -2- and remove side section trim panel -3- -Arrow B-.
Removing front side section trim panel (passenger's side).
1. Partly loosen carpet -1- at the bottom in the area of the A-pillar -Arrow A-