911 Targa 4S (997) F6-3.8L (2007)
5. Press connection of backrest cover -1- sideways into the backrest frame -2- with a plastic wedge -3-.
6. Press cover for backrest -1- into the backrest shell -2- lower left and right using a screwdriver -3-.
Installing guide for seat belt
INFORMATION: If the backrest cover -1- has been replaced after repairs, the seat-belt guide mounting points must be measured again and marked.
-
Mark upper mounting point with the dimensions -A= 95 mm- and -B= 50 mm-.
-
Mark lower mounting point with the dimensions -C= 25 mm- and -D= 155 mm-.
1. Position seat-belt guide -1- with sleeve -5- with the aid of the marking on the backrest cover.