911 Targa 4S (997) F6-3.8L (2007)
2. Remove warning contact wire at the brake caliper and expanding spring. Remove warning contacts from the disc brake pads.
3. Brake piston resetting fixture 9472 (for 6 piston caliper) must be positioned on the brake caliper between the disc brake pads. Then press the pads
back evenly -Direction arrows-.
4. Remove disc brake pads.
Removing brake pad
Installing front brake pads
Installing front brake pads 6 piston caliper
Warning
Risk of accidents if brake pads with the wrong brake pad quality are installed.
This can result in longer braking distances and more wear.
-> Use only the Porsche type specific brake pads.
Warning
Increased risk of accidents if old parts are fitted on brake caliper.