911 Targa 4S (997) F6-3.8L (2007)
Connect coolant hose -4- and secure with a screw type clamp.
3. Fit and tension the drive belt. Observe running direction.
Removing and positioning drive belt
Subsequent work
Subsequent work
Danger
Risk of engine falling down.
Danger of fatal injury, material damage.
-> Support the engine with the prescribed tool.
1. Install engine carrier.
2. Install rear muffler.
3. Install rear apron.
4. Install air cleaner housing.
5. Install pressure pipe.
6. Fill in coolant and bleed the system.