911 Targa 4S (997) F6-3.8L (2007)
Removing and installing cycle valve
Subsequent work
Subsequent work
1. Install left intake air distributor.
2. Raise the engine.
Lift the engine using a jack and retainer plate P 9592 in the assembly position.
Screw in and tighten M12 collar nuts.
-> Tightening torque: 85 Nm (63 ftlb.)
3. Install fuel filter.
4. Install air cleaner housing.
5. Install pressure pipe.
6. Fill in coolant and bleed the system.