911 Targa 4S (997) F6-3.8L (2007)
Removing and installing additional coolant pump
Subsequent work
Subsequent work
1. Install shut off valve.
2. Install left intake air distributor.
3. Remove oil filter console.
4. Install secondary air pump.
5. Raise the engine.
Raise the engine to assembly position using a retainer plate P 9592.
Screw in and tighten M12 collar nuts.
-> Tightening torque: 85 Nm (63 ftlb.)
6. Install air cleaner housing.
7. Install pressure pipe.
8. Install fuel filter.
9. Connect the battery.