911 Targa 4S (997) F6-3.8L (2007)
4. Use a Seeger circlip ring pliers to remove the Seeger circlip ring -E- on the pulley -C-.
5. Remove pulley -C- on the compressor.
6. Unscrew electric line of solenoid coil on the compressor:
6.1. Remove the three fastening screws holding the air-conditioning compressor -3-.
6.2. Remove the air-conditioning compressor and lift upwards, now the fastening screw -4- for the solenoid coil line is accessible.
6.3. Unscrew the fastening screw -4- for the solenoid coil line.
7. Take out the electric connector -2- for the compressor from between the intake pipes and pull apart.
8. Remove Seeger circlip ring -F- for the solenoid coil with the Seeger circlip ring pliers. Remove the solenoid coil from the compressor housing.
Installing magnetic clutch
INFORMATION: If a new magnetic clutch is installed, the air gap between pressure plate and pulley must be checked with a depth gauge.