911 Targa 4S (997) F6-3.8L (2007)
19. Remove heater/air-conditioning unit from passenger compartment via passenger's door.
Installing heating/fresh air unit.
INFORMATION:
-
Do not remove the plugs until just before installing the expansion valve.
-
Check the condition of foam parts for damage; if in doubt replace.
1. Insert heater/air-conditioning unit in the vehicle over the passenger's side.
2. Lift heater/air-conditioning unit over the centre console and position under dashboard bracket.
3. Position holder for the B+ line on the heater/air-conditioning unit and tighten with the fastening screw -7-.
-
Tightening torque: 1.7 Nm (1.5 ftlb.)