911 Targa 4S (997) F6-3.8L (2007)
Coolant: Service and Repair
WM 193817 Draining and filling in coolant (includes bleeding)
Draining coolant
Draining coolant
Information
To facilitate assembly of coolant pipes and hoses, smear with Kluber Syntheso Glep or alternatively Kluberplus S06-100 assembly gel.
Information
Check Henn coupling O rings and replace them if necessary.
Clean plug connection and coolant hoses before assembly.
Coat O rings and coolant hoses with Kluberplus Gel (Part No. 000.043.205.93).
Remove stoppers before fitting the coolant lines and hoses.
Warning
Hot pressurized coolant.
Danger of scalding and burning.
-> Only work on the coolant system when the engine is "cool".
-> Wear protective clothes, gloves and goggles.
1. Open cap on the reservoir -1- and remove it.
Cap for coolant reservoir
2. Remove rear underbody panel.