911 Targa 4S (997) F6-3.8L (2007)
Fitting circlip
2.2.
Fit (attach) the pressure line (thinner line) - as of model year 2009
Connecting lines/available spare parts
Replace the O-ring -7- and axial spring -5- if necessary. Then connect the lines (plug-in coupling) -1 and 2- ( -(arrow)- ).
Check that the plug-in coupling is locked correctly.
Pull on the connector -1- to check that the plug-in coupling is locked (push and pull slightly in axial direction).
Counter at the plug-in sleeve -2- while doing this.
If the plug-in coupling is locked correctly, you should be able to feel slight axial play between the connector -1- and plug-in sleeve -2-. A
plug-in coupling cannot be partly locked.
Another sure sign of a correctly locked plug-in coupling is the bulbous shape of the axial spring -5-.
Locked plug-in coupling
3. Fit pressure and return lines at the steering gear -arrow-.