911 Targa 4S (997) F6-3.8L (2007)
Installing carbon canister - USA Version
Plug-in couplings in the vehicle
1. Insert canister and connect the plug-in couplings which must engage audibly.
2. Slide plastic holder for the canister -3- into the guide and fix to the plenum panel. Screw in two Torx screws M6 -2- and tighten. - Tightening
torque: 7.5 ftlb.
3. Connect cable plug and clip into the cable guide on the canister -1-.
Subsequent work for carbon canister
1. USA version: Disconnect cable plug from CD changer.
2. Engage support together with CD changer on the plenum panel by means of the retaining clips -Arrows-.