911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-680001.png)
Seat Belt Height Adjuster: Service and Repair
Removing And Installing Adjustment Fitting (Seat Belt Height Adjuster)
Technical values
Preliminary work
Remove B-pillar trim. Refer to Removing and installing B-pillar trim panel.
Removing adjustment fitting (seat belt height adjuster)
1. Unscrew fastening screw -1-.
2. Guide the adjustment fitting -2- upwards out of the B-pillar in -direction of arrow-.
Installing adjustment fitting (seat belt height adjuster)
