911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-517025.png)
17. Clip in wire harness for end plate under windscreen at the three retaining clips -arrow-.
INFORMATION: Only in the cabriolet.
18. Push in connector for rod antenna -23- until it is felt to engage.
19. Push on connector for tank filler neck -22-.
20. Push on connector for filler flap switching element -21- until it is felt to engage.
21. Push on connectors of front antenna for tyre pressure monitoring system -19 and 20- at left and right until they are felt to engage.
22. Lay and connect ABS wire harness, front left and right -17 and 18-.
22.1. Laying ABS wire harness
22.2. Tighten fastening screw of connector socket.
- Tightening torque: 10 Nm (7.5 ftlb.)
22.3. Lock the plug connection securely.
23. Push through main wire harness in direction of luggage compartment.
24. Fit grommets -16- left and right.
25. Clip in wire harness to CD changer/navigation unit -arrows-.
26. Clip in wire harness to loudspeaker amplifier -Arrows A- and fix with new adhesive tape -Arrow B-.
