911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-517035.png)
20. Plug in connector on seat-belt tensioner -3- at left and right.
20.1. Fit rubber sleeve -30-.
20.2. Plug in connector on seat-belt tensioner -3- at left and right until it engages securely.
21. Attach connector to Tiptronic control unit -2- and lock it until it engages firmly.
22. Push plug connection for main wire harness to rear wire harness -1- together at left and right.
22.1. Push plug connection for main wire harness to rear wire harness -1- together and lock it.
Completing the vehicle
1. Insert insulating elements in the area of the rear wire harness.
2. Install mounting saddle for rear-seat backrest.
2.1. Position mounting saddle for rear-seat backrest -2- and secure with the two fastening screws -1-.
- Tightening torque: 10 Nm (7.5 ftlb.)
3. Install left and right support.
3.1. Position the support and engage in lower side member.
