911 Targa 4S (997) F6-3.8L (2007)
Differential Output Shaft: Service and Repair
Removing and Installing Left Halfshaft Flange
Removing and installing left halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panel.
Removing halfshaft flange
Information:
Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).
1. Remove drive shaft on transmission side. To do this, unscrew the six hexagon socket head bolts joining the drive shaft and halfshaft flange.
Drive shaft
2. Lever out halfshaft flange.
Levering out halfshaft flange
Installing halfshaft flange
1. Insert halfshaft flange fully into the transmission.
Information:
Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).