911 Targa 4S (997) F6-3.8L (2007)
Differential Output Shaft: Service and Repair
Removing and Installing Long Halfshaft Flange
Removing and installing long halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove left rear wheel.
Removing long halfshaft flange
Removing long drive shaft flange
1. Remove left drive shaft on the transmission side.
Removing drive shaft
1.1.
Unscrew and remove screws -2- on left drive shaft -1-.
1.2.
Move drive shaft into position.
Information:
Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).
2. Remove long halfshaft flange.