911 Targa 4S (997) F6-3.8L (2007)
/f6-3.8l/Page-374002.png)
Screw in special tool
2. Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side B of pressure piece 9734.
Sealing ring on special tool
3. Hammer the sealing ring along with pressure piece 9734 completely into the transmission by hitting the hexagon-head bolt.
Tapping in sealing ring
Subsequent work
1. Install the right halfshaft flange.
2. Check transmission oil level.
3. Fit the underbody panel.
4. Lower the vehicle.
