911 Targa 4S (997) F6-3.8L (2007)
Removing sealing ring for long halfshaft flange
Information:
The sealing ring for the long halfshaft flange cannot be replaced while the long halfshaft flange is still installed. In the event of leaks, the sealing ring
must always be replaced together with the mounting saddle.
1. Remove mounting saddle.
Unscrew screws -2- and remove mounting saddle -1-.
Removing mounting saddle
Installing sealing ring for long halfshaft flange
1. Replace sealing ring for long halfshaft flange.
Long halfshaft flange
Always replace seal -2-.
Information:
The sealing ring for the long halfshaft flange cannot be replaced while the long halfshaft flange is still installed. In the event of leaks, the sealing ring
must always be replaced together with the mounting saddle.
2. Install mounting saddle.