911 Targa 4S (997) F6-3.8L (2007)
Differential Output Shaft: Service and Repair
Removing and Installing Short Halfshaft Flange
Removing and installing short halfshaft flange
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove right rear wheel.
3. Remove underbody panelling.
4. Remove right drive shaft.
Removing short halfshaft flange
Removing short drive shaft flange
1. Remove short drive shaft flange.
Tap out short drive shaft flange using a striker VW 771/1.
Removing short drive shaft flange
Installing short halfshaft flange
Installing short drive shaft flange
Information:
Protect drive shafts against mechanical damage (e.g. with a rubber hose that has been cut open).