911 Targa 4S (997) F6-3.8L (2007)
3. Apply cavity preservation.
3.1. Insert spray-gun hose for cavity preservation through the opening -arrow- in the B-pillar and move it 30 cm forwards and then 30 cm back
into the roof frame.
3.2. While actuating the spray gun, pull the hose out of the roof frame at the front and rear in about 2 seconds and apply cavity preservation in
areas -A and B-.
Removing lower part of outer side-window seal
1. Remove lower part of side-window seal.
1.1. Drill out rivets -2- in the lower part of the side-window seal -1- using a 4.1 mm drill.
1.2. Remove lower part of side-window seal -1- by lifting it upwards.
2. Remove rubber sleeve -A- at the bottom of the door sill.