911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
and keep bleeder hose firmly in place.
Caution: A pressure of up to 180 bar is present in the system.
Wear goggles and protective gloves!
-
Repeat the latter operation (fill pressure accumulator completely and release accumulator pressure completely) once or twice (
brake fluid must be free from air bubbles).
-
After making sure that all air bubbles have been evacuated by the bleeding process, tighten bleeder valve securely and reconnect electrical
connector at pump. Make sure that the connector engages correctly.
-
Switch off and disconnect bleeder device if it is still running and remove hose clamp from overflow hose (vent).
-
Operate brake pedal several times. (Make sure the bleeder device is not connected.)
-
After the pump unit has switched off, correct brake fluid level. Never top up beyond the "Max. mark".
