911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
-
With the bleeder device switched on, drain approx. 200 cc brake fluid at pressure accumulator. For this purpose, connect electrical connector to
pressurizing pump with ignition key in position 1. As soon as the specified quantity has been drained, pull off connector and close bleeder valve.
-
Switch off and disconnect bleeder device.
Remove hose clamp from overflow hose (vent).
-
Fill pressure accumulator completely by connecting the electrical connector.
-
After the pump unit has switched off, correct brake fluid level. Never top up beyond the "Max. mark".
