911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Part 2 Of 2
1. Rotate crankshaft at pulley until the pulley mark is exactly in line with the separating joint on the crankcase or the line mark on the blower
housing.
2. Take off A/C compressor bracket.
3. Undo hexagon head bolt, having a helper use Special Tool 9548 (locking wrench) to lock. Take off pulley.
4. Place Special Tool 9553 (locking device) into position.
5. Turn both camshafts until punch mark points up.