911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Camshaft: Specifications
Tightening
Tightening Specifications
Camshaft Housing to Heads
Cylinder Bolt (Outer M8 x 55)
Cylinder Bolt (Inner M8 x 30) ........................................................................................................................................................... 23 Nm (17 ft lb)
Camshaft Chain Sprocket Bolt
1st Stage: Setting Torque ................................................................................................................................................................... 20 Nm (15 ft lb)
2nd Stage ................................................................................................................................................................................... Tightening Angle 90°
CAUTION: Fit special tool No. 9582 (1 piece cam sprocket) or tool No. 9191 (multiple piece cam sprocket), holding wrench, to the chain
sprockets during tightening to reduce the strain on the chain drive and the locking devices.
Power Steering Drive
Power Steering Drive Sprocket Bolt ............................................................................................................................................................... 120 Nm
NOTE: Use Tool No. 9236 To Counterhold When Tightening.
