911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
1. Prepare measuring instrument for testing
-
Lower pointer into measuring instrument
2. Pick up measuring instrument
-
Grasp rubber strap between thumb and index finger.
3. Position measuring instrument
-
Position measuring instrument in center between pulleys on the drive belt.
-
The lateral stop of the instrument must rest on the side of the V-belt.
4. Measure belt tension
-
Press push-button to apply uniform pressure in perpendicular direction on top of V-belt until the detent spring can be heard (or felt) to
disengage.
-
After the detent spring has disengaged, the measuring instrument or the push-button, respectively, must not be pressed anymore as the reading
will otherwise be incorrect.
5. Read off measurement
-
Lift measuring instrument carefully off the V-belt.
CAUTION:
