911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
8 - Oval-head sheetmetal screw (B 4.8 x 18)
Washer 5x26x 1
9 - Combination screw (6 pcs.)
10 - Rear spoiler
11 - Seal
12 - Hexagon nut (9 pcs.)
13 - Heat shield of closing panel
14 - Sheetmetal screw (4 pcs.)
15 - Washer 5 x 26 x 1(4 pcs.)
16 - Pan head screw (2 pcs.)
17 - Washer (2 pcs.) A 13
18 - Bumper support
3. Remove engine underside tray.
4. Remove sealing frame and charge air cooler. While doing so, do not drop the square fastening nuts of the lower charge air cooler bracket.
CAUTION: Plug-seal pressure hoses immediately against foreign substances.
5. Unplug, unlock and separate oxygen sensor connections.
O2 Connectors
1 - Oxygen sensor ahead of cat. conv.
2 - Oxygen sensor behind cat. conv.
(cylinder bank 1 - 3)