911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Air Door: Adjustments
Adjusting the Temperature Mixing Valves
NOTE: The temperature mixing vales are located below the instrument panel in the driver and passenger footwells.
1. Set engine to "temperature mixing valves closed" end position: Use two jump leads to apply 12 volts to pin 4 (positive) and pin 5 (negative) until
the motor is in the end position.
2. If the temperature mixing valve is not closed, undo the motor mount. Slide the motor in the slots until the temperature mixing valve is set in the
closed end position.
