911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Headlamp Control Module: Service and Repair
1. Loosen fastening screw on control unit bracket and remove control unit.
2. Disconnect electric plug connection and detach bracket from control unit.
3. Install new control unit and check operation.
Removing and installing trigger device
NOTE: To check operation, the trigger unit of the second headlight can be installed.
1. Remove headlight housing. Fold back retaining bracket on headlight housing and remove lid with integrated trigger device.
2. Unscrew electric plug connection on D2S lamp (bajonet catch) and separate plug connection on trigger device.
3. Install lid with integrated trigger device of second headlight and check operation.