porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Porsche System Tester 2|Page 1537 > < Porsche System Tester 2|Page 1535
Page 5
background image

The Porsche System Tester 2 switches itself off after an Off-delay:

-

no voltage is supplied via the mains power supply unit or via the vehicle battery
or

-

no data are being transferred via an interface (no key pressed, no communication with control module).

The Off delay time can be changed in the Configuration menu. The default Off-delay time is 3 minutes.

Automatic switch off is preceded by a rhythmic beeping sound (10 seconds). The Porsche System Tester 2 will remain switched on if the mains power
supply is connected or a key is pressed within this time

Software Update:
The software can be updated using the supplied CDROM drive.

1. Connect CD-ROM drive with the Porsche System Tester 2.
2. Connect Porsche System Tester 2 and the CD-ROM drive to the mains power supply unit.
3. Load CD-ROM in the drive and close the drive.
4. Switch on the Porsche System Tester 2.
5. Select "Software installation" in the Configuration menu.

Porsche System Tester 2|Page 1537 > < Porsche System Tester 2|Page 1535