911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
The kinematic toe-in is then correctly adjusted.
The adjustment is made on control arm 4 (caster arm).
To do this, turn the eccentric (range C) after loosening the fastening screw.
When adjusting the kinematic toe-in, ensure that the camber values remain within the permissible tolerance.
NOTE:
-
If the eccentric (range C) is at the reversal point, greater force may be necessary to turn the eccentric.
-
In this case, relieve the corresponding wheel or lift the rear axle.
-
Fit special tools 9549 and 9550 on the opposite rear axle side.
Also perform measurement and adjustment on this axle side as described above.
Special tool 9549 is fitted in the opposite direction, whilst the direction of special tool 9550 remains the same on the other axle side.
