911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Pressure Plate: All Technical Service Bulletins
Clutch Pressure Plate - Chatter
Group
3
Number
9606
Model
6 Cyl.
Part Identifier
3050
September 19, 1996
Subject:
Clutch Pressure Plate Tightening
ATTENTION:
Service Manager / Service Technician
Models Affected:
911 Carrera Model Year 1995 on
911 Turbo Model Year 1996 on
Concern:
Improper clutch pressure plate tightening or loosening procedures may distort the pressure plate housing causing clutch chatter.
Repair Procedures:
It is very important that when removing or installing the clutch pressure plate, the bolts must be loosened or installed in an alternating (star) pattern.
Each bolt should only be loosened or tightened 2 turns at a time. Continue this pattern until the bolts are fully loosened or tightened.
When installing the clutch plate, always use new bolts, part number 999 510 015 02. Torque the bolts to 23 Nm (17 ft lb).
Parts Information:
Part Number
Description
Qty.
999 510 015 02
Clutch Plate Bolt
9
