911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Rear Wheel Bearing (Part 2 Of 2)
Preliminary work
Remove wheel carrier, brake disc, parking brake shoes, parking brake cable, brake disc cover and speed sensor.
Removal
-
Press out rear-wheel hub with pressure piece P 297 A (tool A).
Use the separator (tool B) for support.
If there is not enough space for the wheel hub between the press, appropriate shims will additionally be necessary.
-
Remove retainer plates for the wheel bearing (4 screws).
