911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
Assembly
NOTE:
-
Always replace the complete disc pack in the case of repairs.
-
Replacing individual discs is not permitted.
1. Lightly oil all surfaces of the discs, thrust rings and axles with transmission oil.
2. Install cup springs so that the cambers point inwards to the disc pack.
3. After assembly, measure the basic locking torque with one shaft bevel gear driven and the other one fixed.
-
To do this, clamp one flange in the vice with two screws and position differential.
-
Insert second flange with shopmade connecting piece and turn differential with a torque screwdriver.
-
A basic locking torque of 2.5 to 15 Nm (2 to 11 ft lb) must be reached.
