911 Turbo AWD F6-3600cc 3.6L SOHC Twin Turbo (1997)
2. Engage 4th gear and pull off inner race of needle roller bearing (5th gear).
Assembly
1. Check synchronizing rings by pushing rings onto tapers of gearwheels and measuring gap ,A" with a feeler gauge.
-
Installation dimension:
New: 0.9 mm minimum
Wear limit: 0.6 to 0.7 mm
2. Engage 4th gear and fit all gearwheels.
3. Adjust inner shift rod until all gears may be preselected freely without notching.
-
To adjust, undo hexagon head bolts of tensioning plate and rotate eccentric bushing.
4. To check, shift through all gears, using a long M 8 bolt that is screwed into the inner shift rod.