911 Turbo AWD (996) F6-3.6L Turbo (2001)
3. Fit new expanding spring and new retaining pin with a new screw on the brake caliper. These parts are available as a repair set and must be
renewed each time the pads are changed. When tightening the screw, counter at the retaining pin. Tightening torque of the screw = 25 ± 3 Nm (19
± 2 ftlb.)
4. Insert the warning contact wire and warning contacts.
5. Firmly press the brake pedal several times to position the brake pads on the brake discs.
6. Check and, if necessary, correct the brake fluid level.
Bedding in the brake pads
-
New brake pads require a bedding-in period of approx. 200 km. Not until then do they achieve their best friction and wear coefficient.
-
During this period, the brakes should be subjected to full stress when travelling at high speed only in emergencies.