911 Turbo AWD (996) F6-3.6L Turbo (2001)
Wheel Fastener: Specifications
TIGHTENING SPECIFICATIONS
Wheel Bolts .................................................................................................................................................................................. 130 Nm (96 ft. lbs.)
NOTE:
-
Screw in wheel bolts by hand and then tighten evenly.
-
Start at the top when tightening.
NOTE:
-
Apply a thin coating of Optimoly TA, or equivalent, aluminium paste to the thread, shank and below the head of the wheel bolts (between bolt
head bearing surface and spherical cap ring).
-
Do not coat the spherical cap bearing surface facing the wheel.
-
If heavily contaminated, clean screws first with a lint-free cloth.