911 Turbo AWD (997) F6-3.6L Turbo (2010)
-
Wide range of uses
-
No identifying features
Base surfaces:
-
Hardened paintwork, sanded
-
Sheet steel, sanded
-
Aluminum, sanded
-
Galvanized steel, sanded
-
Polyester products, sanded
-
KTL, sanded
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 6.1
-> S 9.2.2
Note:
-
Raw material base: Special polymers that can be diluted in water
-
Flash point: 80° C/176.0° F
-
Spec. weight: 1.43 g/cm3
-
Solid content: 60.0% weight/41.9% vol.
-
Theoretical yield: 8.4 m2/ltr. with a dry coat thickness of 50 microns
-
Storage: Unopened original containers can be stored for 12 months at 20° C. Do not store at below 5° C.
-
Rinse equipment before and after use with Standohyd(R) Demineralized Water, then clean again with cleaning thinner
VOC value:
-
93 g/l
NOTE:
-
Work materials must be suitable for water-dilutable products; see manufacturer s specifications.
-
Dispose of cleaning water correctly, not into sewerage systems.
-
Collect left-overs from water-dilutable products separately from left-overs from conventional products.
S 9.5.3.1 Processing