911 Turbo AWD (997) F6-3.6L Turbo (2010)
Engine Control Module: Technical Service Bulletins
Engine Controls - Erroneous DTC's P0544-P0549
Mar 25, 2010
The present document was valid at the time of print. A later version may be available online
DME Control Unit: Fault Code P0544... to P0549 (Advanced Technical Information 14110)
Document with limited validity
This Quick Information is valid until April 30, 2010
911 Turbo (997)
DME control unit:
Fault code P0544/P0545/P0546/P0547/P0548/P0549 (exhaust temperature sensor).
Sales check on new vehicles.
Maintenance and/or repair work.
Since January 26, 2010 until further notice, vehicles will be delivered in which the fault codes mentioned above are stored in the DME fault memory.
The fault memory entry is caused by the exhaust temperature sensor.
The fault memory entry has no effect on the engine's emissions, power or component protection.
Date of Introduction:
January 26, 2010, as of Vehicle Ident. Nos.
99 XAS7 66135
99 9AS7 73084
Please ignore the fault entry stored on the relevant vehicles - as specified below - during the sales check and during maintenance and repair work until
further notice. We will let you know what further action is required at the relevant time.