911 Turbo Cabriolet (996) F6-3.6L Turbo (2004)
/f6-3.6l_turbo/Page-232010.png)
16. Prepare central bushing. Fit new O-ring and grease liberally.
17. Position the bushing on the studs.
18. Fit pushing device 9660 on stud. Lay a plastic washer on the bushing and press the bushing into place on the piston by turning the handwheel.
View of the special tool
19. Slowly turn belt pulley or the crankshaft clockwise until the central piston can no longer be seen in the gap between the cylinder and the crankcase.
Then press the bushing into place with the pushing device until the restraining strap detaches from the piston shank.
20. Open the restraining strap lock using two screwdrivers and guide the restraining strap out between the crankcase and the bushing.
