porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2348 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2346
Page 6
background image

NOTE:  Turn the red actuation toggle (on the main battery relay) clockwise as far as the stop, status - A - (bayonet). The main battery relay and the inner
and outer EMERGENCY STOP switches are without function.

NOTE:  Turn the red actuation toggle anti-clockwise and remove, status - B -.

-

Outer EMERGENCY STOP switch - left cowl panel cover, standard - press forwards (switch position On ). The EMERGENCY STOP switch is
actuated with the red pull loop, which can be disengaged and laid towards the outside under the rear edge of the luggage compartment lid.

Actuating inner EMERGENCY STOP switch Push lever of the toggle switch forwards.

Fold the transparent cover of the emergency switch forwards and press the red switch. The switch position Racing track is displayed with a warning lamp
in the switch. Moving the EMERGENCY STOP switch to its starting position Press the red emergency switch once more and close the cover.

NOTE:  After the installation of the main battery relay and switching off using the inner/outer EMERGENCY STOP switch, the Work instructions after
disconnecting the battery Refer to No. 9-1, General described in Chapter 9 must be observed.

Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2348 > < Removing and Installing Relay For Main Switch - GT2, - As of My 2001|Page 2346